CDL / CDLF Vertical Multistage Pump

CDL / CDLF Vertical Multistage Pump

Overview

CDL and CDLF are vertical inline multistage centrifugal pumps built with a stack of identical stage chambers. Each stage adds head, so a compact vertical unit can deliver the pressure that a single-stage pump of the same diameter cannot. The suction and discharge ports sit on the same centre line, which lets the pump be installed directly in a pipeline like a valve and saves floor space in a plant room.

Construction

CDL uses cast iron with stainless steel stage components; CDLF is the full stainless steel version for aggressive or hygienic water. The pump is close-coupled to a standard vertical motor, with a cartridge mechanical seal that can be replaced without dismantling the hydraulic stack. Stage chambers, impellers and diffusers are pressed stainless steel, giving a smooth flow path and stable efficiency across the range.

Model Designation

CDL / CDLF is followed by the nominal flow and the number of stages, for example CDLF 10-6 means about 10 m³/h nominal flow with six stages. The selected stage count follows the required duty head; the performance curve of the exact build is issued with the quotation.

Technical Data

Rated flow, rated head, motor power and connection size are fixed per model and must be matched to the duty point. We issue the performance curve, dimensional drawing and motor specification of the selected model together with the quotation. Standard flanges are GB, with DIN or ANSI drilling available on request.

Application

High-rise building pressure boosting, municipal secondary water supply, boiler feed and condensate return, reverse osmosis and water treatment skids, irrigation, washing systems, HVAC circulation and general industrial process water.

Note

Please advise flow, head, liquid, temperature, voltage and frequency when enquiring. We will confirm the model, stage count, performance curve and dimensional drawing accordingly.