TD Pipeline Circulation Pump

TD Pipeline Circulation Pump

Overview

TD is a single stage inline circulation pump with suction and discharge on one centre line. It fits into a pipe run like a valve, so no offset foundation or elaborate pipework is needed and the floor area is small. The vertical motor sits above the hydraulic end, clear of leakage and accessible from above.

Construction

An inline volute casing carries both flanges at the same height. A closed impeller sits on the extended motor shaft with a cartridge mechanical seal closing the shaft passage. A lantern bracket allows the rotor and seal to be withdrawn upwards, and the unit is supported by pipework brackets or a base.

Model Designation

TD is followed by the nominal pipe diameter and the motor rating. Motor poles and impeller diameter follow the design flow and head, so one designation covers several duty points. The curve, motor schedule and general arrangement drawing are issued with the quotation.

Technical Data

Rated flow, head, motor power, nominal diameter, working pressure and temperature range are fixed per model and checked against the circuit. Motors match the site voltage and frequency, and flanges follow GB drilling. Duty and standby changeover can be arranged. We confirm the curve and outline drawing before order.

Application

Chilled and hot water circulation in HVAC systems, boiler and heating loops, domestic hot water return, pressure boosting in closed circuits, and industrial process water recirculation where the pipe centre line is fixed.

Note

Please provide design flow and head, system pressure and temperature, pipe nominal diameter, supply voltage and frequency, and available headroom. We will confirm the model, motor rating, curve and support arrangement.