QJ / SJ Deep Well Submersible Pump

QJ / SJ Deep Well Submersible Pump

Overview

QJ and SJ are multistage submersible pumps designed to work fully submerged inside a borehole or well casing. Their slim diameter fits standard well sizes, and the stacked stage design builds the head needed to lift water from deep aquifers. The motor is a water-filled or oil-filled submersible motor directly coupled below the hydraulic stack.

Construction

QJ uses cast iron or stainless hydraulic components for general groundwater. SJ is the stainless steel version, with pressed stainless stage chambers, impellers and diffusers for cleaner or mildly aggressive water. A non-return valve is fitted at the discharge, and the cable and motor are sized for the submergence depth and starting method.

Model Designation

The model letters are followed by the minimum well diameter, nominal flow and number of stages. The stage count and motor power follow the required total head including water level, pipe friction and residual pressure at the surface.

Technical Data

Flow, head, stage count, motor power, well diameter and maximum submergence are fixed per model. We provide the performance curve, pump outline, cable specification and motor data of the selected build with the quotation.

Application

Groundwater extraction for municipal and rural water supply, agricultural irrigation, livestock watering, groundwater source heat pump systems, dewatering and fountain or landscape water supply.

Note

Please advise well casing diameter, static and dynamic water level, required flow, discharge head, sand content, voltage and frequency when enquiring. We will confirm the stage count, motor and curve accordingly.