FUH FLU Wear and Corrosion Resistant Slurry Pump

FUH FLU Wear and Corrosion Resistant Slurry Pump

Overview

FUH and FLU are centrifugal pumps for liquids that are both corrosive and abrasive, a combination that quickly wears ordinary metal or rubber lined pumps. Wetted casing and impeller are made or lined with ultra high molecular weight polyethylene, which combines chemical resistance with good sliding abrasion resistance. Large impeller passages reduce clogging.

Construction

The volute casing and semi open impeller are moulded or lined in ultra high molecular weight polyethylene and supported by an outer metal armour shell. The shaft runs in a robust oil lubricated bearing housing, with a mechanical seal or packed gland arranged for flushing. Wear parts are separate and replaceable, and the pump couples to a motor on a rigid base.

Model Designation

FUH or FLU is followed by inlet and outlet sizes, impeller type and motor rating. Solids size, concentration and the chemical determine the lining grade, passage width and seal plan. The curve, wear part list and outline drawing are issued with the quotation.

Technical Data

Rated flow, head, motor power, allowable solids size and concentration, temperature limit and working pressure are fixed per model. Abrasion and chemical compatibility are checked together, since a material resistant to the liquid may still wear quickly at high solids velocity. We provide the curve, drawing and wear part schedule for approval.

Application

Corrosive slurries in mineral processing and tailings, phosphoric acid and fertilizer slurry, pickling and etching lines, lime and gypsum slurry, flue gas desulphurisation circuits, and waste water carrying grit or abrasive fines.

Note

Please provide flow and head, slurry composition, solids size and concentration, temperature and pH, suction conditions, and the site voltage and frequency. We will confirm the lining grade, impeller type, seal plan and curve.