AZ Chemical Process Pump
Overview
AZ is a horizontal single stage end suction pump built for continuous chemical process duty. The rotor pulls out from the rear and the seal chamber accepts a flushing or quench connection. Wetted materials are selected against the actual liquid, so the same hydraulic design handles acids, alkalis, salt solutions or stock with moderate solids.
Construction
The volute casing has axial suction and radial top discharge and bolts to a rear cover holding the bearing housing. A closed or semi open impeller runs on a shaft with oil lubricated bearings. A mechanical seal sits in a separate chamber with flushing and cooling connections, and the unit couples to a motor on a rigid base.
Model Designation
AZ is followed by suction and discharge sizes, impeller diameter and the material code of the wetted parts. Liquid, concentration and temperature fix the material and seal plan, so the full designation is settled after these are known. The curve, material schedule and outline drawing come with the quotation.
Technical Data
Rated flow, head, speed, motor power, required NPSH, working pressure and temperature limit are fixed per model. Chemical compatibility of casing, impeller and seal faces is checked against concentration and temperature. Flanges follow GB drilling with DIN or ANSI available. We provide the curve, drawing and material list for approval.
Application
Chemical process transfer and circulation, acid and alkali handling, salt and brine solutions, pulp and stock with moderate solids, petrochemical side streams, and industrial duties needing corrosion resistance and easy servicing.
Note
Send flow and head, liquid name and concentration, temperature, solids content and particle size, suction conditions, preferred seal arrangement, and the site voltage and frequency. We will confirm the model, materials, seal plan and curve.
