BA Canned Motor Pump

BA Canned Motor Pump

Overview

BA is a seal-less canned motor pump. The impeller and motor rotor share one shaft inside a pressure shell, and a thin non magnetic can separates the stator from the pumped liquid. With no rotating shaft passing out of the pressure boundary, there is no mechanical seal and no leakage path to atmosphere.

Construction

A centrifugal hydraulic end bolts to the stator housing, with the common shaft running in sleeve bearings lubricated by the pumped liquid. A containment can encloses the rotor cavity and the terminal box sits outside the pressure boundary. There is no coupling or base alignment, and a circulation line can be arranged for bearing cooling and venting.

Model Designation

BA is followed by suction and discharge sizes, motor rating and the material code of the can and wetted parts. Liquid conductivity, temperature and suction pressure fix the circulation arrangement and build. The curve, material schedule and outline drawing are issued with the quotation.

Technical Data

Rated flow, head, motor power, working pressure, temperature limit and bearing arrangement are fixed per model. Motors match the site voltage and frequency. Because bearings run in the pumped liquid, dry running must be avoided and a minimum flow or circulation line may be required. We provide the curve and material list for approval.

Application

Volatile, toxic, odorous or flammable liquids, high purity and expensive products, chemical dosing, heat transfer oil and refrigerant circulation, and pressurised or vacuum loops where external leakage is unacceptable.

Note

Please advise flow and head, liquid name and concentration, temperature, vapour pressure, solids content, suction pressure, and the site voltage and frequency. We will confirm the model, can and bearing materials, circulation arrangement and curve.