XS S Single Stage Double Suction Split Casing Pump

XS S Single Stage Double Suction Split Casing Pump

Overview

XS and S are single stage double suction pumps with a casing split along the shaft centre line. Water enters the double entry impeller from both sides, balancing axial thrust and allowing large flows at moderate head. The upper casing lifts off for rotor inspection without breaking pipe connections.

Construction

The horizontally split volute casing is bolted along the shaft centre line, with both flanges in the lower half. A double entry impeller runs between two bearing housings, sealed by mechanical seal or packed gland on each side. The rotor lifts out as a complete assembly, and the pump couples to a motor on a common base.

Model Designation

XS or S is followed by the suction and discharge diameters and the impeller diameter or motor rating. Flow and head determine the impeller and motor, and rotation direction follows the plant layout. The curve, general arrangement drawing and seal schedule are issued with the quotation.

Technical Data

Rated flow, head, speed, motor power, required NPSH and flange sizes are fixed per model. Rotation, bearing arrangement and materials are selected with the installation and liquid. Flange drilling follows GB as standard. We provide the curve, outline drawing and foundation details for approval before manufacture.

Application

Water works and raw water intake, large volume transfer between reservoirs, irrigation and land drainage, circulating water in power and industrial plants, district heating, and high flow cooling water duties.

Note

Please send duty flow and head, liquid and temperature, suction conditions and available NPSH, required rotation, available floor space, and the site voltage and frequency. We will confirm the model, rotation, curve and foundation drawing.