ISGB Easily-detachable Inline Pump
Overview
ISGB is a vertical inline single-stage centrifugal pump developed from the ISG pipeline pump platform. Its key feature is the detachable drive assembly: the motor, coupling and mechanical seal can be lifted out as one unit while the pump casing stays bolted into the pipework. This cuts downtime in plant rooms where pipework cannot easily be drained or dismantled.
Construction
Suction and discharge are on the same centre line with equal nominal diameter, so the pump installs like a valve. A top-mounted standard motor drives a stainless or cast iron impeller through a rigid coupling. The cartridge mechanical seal is accessible from above, and the bearing housing is separated from the liquid chamber to protect the motor.
Model Designation
ISGB is followed by the nominal inlet and outlet diameter and the nominal head or impeller diameter, depending on the build. The exact designation is confirmed against the required duty point.
Technical Data
Rated flow, head, motor power and flange rating are fixed per model. We provide the performance curve, outline drawing and seal specification of the selected model with the quotation. GB flange drilling is standard; DIN or ANSI drilling is available on request.
Application
HVAC chilled and hot water circulation, high-rise building water supply, district heating secondary circuits, industrial cooling water loops, irrigation mains and general clean water pressure boosting.
Note
Please advise flow, head, liquid, temperature, voltage and frequency when enquiring. We will confirm the model, curve and dimensional drawing accordingly.
