FS FSZ Engineering Plastic Chemical Pump

FS FSZ Engineering Plastic Chemical Pump

Overview

FS and FSZ are chemical pumps whose entire wetted path is engineering plastic, so no metal contacts aggressive liquids. FS is the standard centrifugal build and FSZ adds a priming chamber for pumps mounted above the liquid. An armoured outer shell carries the mechanical loads while the plastic provides chemical resistance.

Construction

The casing and closed impeller are moulded or lined in engineering plastic and supported by a metal armour shell. A mechanical seal with corrosion resistant faces isolates the bearing housing and motor from the liquid path. The FSZ variant carries a priming chamber with a check valve, and the plastic grade follows the chemical and temperature.

Model Designation

FS denotes the centrifugal version and FSZ the self priming version, followed by inlet and outlet sizes and the motor rating. Plastic grade and seal faces follow the chemical, concentration and temperature, so the build is fixed after these are known. The curve and material schedule come with the quotation.

Technical Data

Rated flow, head, motor power, temperature limit and allowable solids content are fixed per model. Chemical compatibility is checked against both concentration and temperature before the plastic grade is chosen, and FSZ priming lift depends on site suction conditions. Flanges follow GB drilling. We confirm the curve and material list before order.

Application

Acid and alkali transfer, electroplating and surface treatment baths, chemical dosing and neutralisation, scrubber and absorber circulation, waste water treatment, and laboratory or pilot plant duties with corrosive liquids.

Note

Send flow and head, chemical name and concentration, temperature, solids content, suction lift and whether self priming is required, and the site voltage and frequency. We will confirm the plastic grade, seal arrangement, model and curve.