XBD-ISG Vertical Inline Fire Pump
Overview
The XBD-ISG is a vertical single stage inline pump used on fire water duties. Because the suction and discharge ports share one centre line, the pump fits into a pipe run like a valve and needs no offset foundation or elaborate pipework. It suits plant rooms where the layout is already fixed and space around the pump is limited.
Construction
A vertical motor sits above the pump casing on a bracket, with the impeller mounted directly on the extended motor shaft or on a short coupled shaft. The inline casing carries both flanges at the same height, and a mechanical seal closes the shaft passage. The assembly is supported on a base or by the pipework brackets depending on size, and the motor remains accessible from above.
Model Designation
XBD identifies the electric fire pump duty and ISG the vertical inline construction. The nominal diameter and motor rating are selected from the required flow and head, so one type code covers several performance points. The curve, motor data and flange dimensions of the chosen build are supplied with the quotation.
Technical Data
Rated flow, head, motor power and nominal diameter are fixed per model. Standard flange drilling follows GB, with alternatives available on request, and motors are matched to the site voltage and frequency. The pump can be arranged as duty or standby with changeover control. We confirm the model, curve and outline drawing before order.
Application
Fire water boosting in buildings and industrial plants, fire hose and sprinkler supply loops, and retrofit projects where an existing horizontal set must be replaced within a fixed pipe centre line.
Note
Please send the design flow and head, pipe nominal diameter, supply voltage and frequency, and installation constraints such as available headroom. We will confirm the model, motor rating, curve and support arrangement.
